Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 51)

AlliedView™-EMS 4.0.3 Device Management Guide Page 51 of 468
Note - Device Manager does not handle objects of type BITS correctly. As a result,
the MED TLVs Tx Enable parameter will not be configurable and will display
an 8-bit binary string instead of the actual TLV types allowed. However,
the TLV types allowed can still be determined by looking at the bits that are
on from left to right:
•
Bit 0 - Capabilities
•
Bit 1 - Network Policy
•
Bit 2 - Location
•
Bit 3 - Extended PSE
•
Bit 4 - Extended PD
•
Bit 5 - Inventory
Network Policy Info
Displays information about a particular policy on a specific port component.
Note - Device Manager does not handle bit string correctly. As a result, the
Application Type parameter will not be displayed.
Location Info
Displays the Location information as advertised by the local system.
Note - Device Manager always treats objects of type OCTET STRING as a
sequence of bytes in hexadecimal format and does not convert them to plain
text format when necessary. As a result, the Location parameter will neither
be readable nor configurable.
POE Info
Displays the defined type of Power over Ethernet advertised by the local
device.
POE/PSE Port Info
Displays a table that contains one row per port of PSE/PoE information on
the local system known to this agent.
Policy Container Config
Displays the configuration of a particular policy in the media policy container.
Note - Configuring the Row Status parameter to any invalid values will not
return an error message.
Note - Device Manager always treats objects of type OCTET STRING as a
sequence of bytes in hexadecimal format and does not convert them to plain
text format when necessary. As a result, the Port Number parameter will
neither be readable nor configurable.