Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 86)

AlliedView™-EMS 4.0.3 Device Management Guide Page 86 of 468
Local Users
Displays information about all usernames, their passwords and their
authorizations.
Note - The current firmware version is unable to display any value for the
Password Expiry Date parameter.
Note - The current firmware version will always display an encrypted value
for the User Password parameter regardless of whether the type of
password set is 'clear text' or 'encrypted password'.
Note - The current firmware version accepts up to 160 characters for the
User Password parameter, including the '#' or '$' character as directive that
indicates the type of password being used.
Note - The current firmware version does not allow Password Valid Time
parameter to be configured.
Authenticated Users
Displays all the current users that have been authenticated.
EAP Method Lists
Displays information about all EAP method lists.
Note - The current firmware version does not allow Row Status parameter
to be set to 'create and go' or 'destroy' as its value.
Password Verification
Displays table that specifies per every system level, old and new passwords.
Note - The current firmware version does not allow Old Password, New
Password and Confirm Password parameters to be configured.
Port-based Authentication
Basic Info
Displays basic port authentication and VLAN information.
Note - Device Manager always treats objects of type OCTET STRING as a
sequence of bytes in hexadecimal format and does not convert them to plain
text format when necessary. As a result, the Guest VLAN Ports parameter
will neither be readable nor configurable.
Port Authentication Info
Displays the value of the MAC based authentication information and Radius
attributes.
Note - The current firmware version does not allow Radius Attribute ACL
Name Enabled parameter to be set to 'true' as its value.