Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual
Page 70

AlliedView™-EMS 4.0.3 Device Management Guide
Page 70 of 468
POE Info
Note
- For devices configured in stacked mode, where at least one POE and one
non-POE devices are members of the stack, attempting to access the POE Config
table will cause the stacked devices to restart continuously unless the POE Config
table is closed.
MCU Info
Displays POE device's Microcontroller information.
POE Config
Displays POE device's configurations.
Socket Info
Displays the sockets information which are currently open in the system.
Management Info
General Management
Displays common management information.
Note
- The current firmware version does not allow Reboot Delay parameter
to be configured.
Flash File System
Basic Info
Displays the flash file size of the device.
File Lists
Displays the device's list of files.
Note
- The current firmware version does not allow the Row Status
parameter to be configured.
File Copy Info
Displays the current history index and messages for file copy.
Jumbo Frames
Displays the current jumbo frames status.
Management ACL
Basic Info
Displays basic information about the management access list.
Note
- The current firmware version does not allow the Active List
Name parameter to be configured.
Access Lists
Displays information about access lists.