Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 285)

AlliedView™-EMS 4.0.3 Device Management Guide Page 285 of 468
Route Table
Displays the table of routes learned through PIM route exchange.
Note - The Route Table sub-menu option does not display the correct
parameters. Instead, it displays the sub-menu option name as a parameter
with a value of 'noSuchName'.
Next Hop Table
Displays the table containing information on the next hops on outgoing
interfaces for routing IP multicast datagrams.
Note - The Next Hop Table sub-menu option does not display the correct
parameters. Instead, it displays the sub-menu option name as a parameter
with a value of 'noSuchName'.
Rendezvous Points
Displays the list of PIM information for candidate Rendezvous Points for IP
multicast groups.
Note - The Rendezvous Points sub-menu option does not display the correct
parameters. Instead, it displays the sub-menu option name as a parameter
with a value of 'noSuchName'.
Candidate - RP
Displays the list of IP multicast groups for which the local router is to
advertise itself as a Candidate-RP
Component
Displays the list of objects specific to a PIM.
Note - The Component sub-menu option does not display the correct
parameters. Instead, it displays the sub-menu option name as a parameter
with a value of 'noSuchName'.
Candidate - BSR
Displays the Candidate - Boot Strap Router configuration.
Register Checksum
Displays the Register Checksum including Data RP List settings.
Static RP
Displays the Static RP settings configured in the router.
Note - The current firmware version does not allow the RP Address
parameter to be configured.
Note - The current firmware version returns an incorrect value for the RP
Address and Row Status parameters whenever the Get MIB Value button is used.