Lldp menu – Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual
Page 49

AlliedView™-EMS 4.0.3 Device Management Guide
Page 49 of 468
IGMP Config
Displays configurations of the Internet Group Management Protocol function.
Note
- Valid MIB Set values for the Host Aging Time parameter should range from
60 - 2147483647. However, the current firmware version allows the user to set
values lower than 60.
LLDP Menu
From the LLDP menu, you can view and edit LLDP configurations, statistics, local system
data and remote systems data components.
LLDP Configuration
General Config
Displays LLDP general function such as enabling LLDP, Tx delays and others.
Note
- The current firmware version does not return any value for the Clear
Received Info parameter.
Port Config
Displays the control selection of LLDP Port VLAN-ID TLVs to be
transmitted on individual ports.
Note
- The current firmware version does not allow the Port VLAN Tx
Enable parameter to be configured.
Note
- Device Manager does not handle objects of type BITS correctly. As a
result, the TLVs Tx Enable parameter will not be configurable and will display
an 8-bit binary string instead of the actual TLV types allowed. However, the
TLV types allowed can still be determined by looking at the bits that are on
from left to right:
•
Bit 0 - Port Description
•
Bit 1 - System Name
•
Bit 2 - System Description
•
Bit 3 - System Capabilities
Management Addresses
Displays control selection of LLDP management address TLV instances to be
transmitted.
LLDP Statistics
Remote Tables
Displays LLDP extension objects associated with remote systems.
Port Tx
Displays the LLDP transmission statistics for individual ports.