Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 287)

AlliedView™-EMS 4.0.3 Device Management Guide Page 287 of 468
Note - The Next Hop Table sub-menu option does not display the correct
parameters. Instead, it displays the sub-menu option name as a parameter
with a value of 'noSuchName'.
BOOTP Relay
Basic Info
Displays basic information about the BOOTP relay function.
Note - Valid MIB set values for the Hop Count parameter are in the range
[0-16] inclusive.
Interface Info
Displays information about a specific IP address as a destination to forward
BOOTP packets to.
DNS Relay
Basic Info
Displays basic information about the DNS relay function.
Interface Info
Displays the current DNS relay static.
MD5 Key Config
Displays the current MD5 key table.
Note - To configure the MD5 Key parameter, the Row Status parameter must first
be set to 'create and go'. Once the MD5 Key parameter has been configured, the
Row Status parameter is automatically set to 'active'.
Note - If the MD5 Key parameter is set to a new value whose length is shorter than
the length of the previously active MD5 Key, an extra character, as well as the
remaining characters of the previous key, is appended to the new value.
Bridge Menu
From the Bridge menu, you can view and edit bridge information such as the forwarding
database, discard/aging time information, spanning tree status and 802.1p.
Forwarding Database
Note - A user account assigned a MIB view that excludes a row or multiple rows
from the Forwarding Database table will not be allowed to view the table at all.
Standard View
Displays the Forwarding Database table as returned by the device.