Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 354)

AlliedView™-EMS 4.0.3 Device Management Guide Page 354 of 468
Note - When multiple units of the AT-x900-12X series are stacked together,
the 'Base Ports' submenu is displayed even if the AT-XEM-STK is the only
installed XEM module in the device.
Local System
Network Policy Info
Displays information about a particular policy on a specific port component.
Note - The current firmware version returns a '???(0)(???(0))' value for the
Unknown Policy parameter.
Note - The current firmware version does not return any value for the
Application Type parameter.
Location Info
Displays the Location information as advertised by the local system.
MED General Info
Displays LLDP-MED information about a local component.
Note - The POE/PSE Power Source parameter is not applicable to the AT-x900-12X
series and should be ignored.
Remote Systems
Remote Capabilities
Displays LLDP-MED capabilities of remote devices connected to the device
ports and communicating via LLDP-MED.
Note - The current firmware version returns alphanumeric values for the
TLV Support and Current TLV Supported parameters instead of strings
representing bits.
Network Policy Info
Displays per port policy type information for a particular physical network
connection.
Note - The current firmware version does not return any value for the
Application Type parameter.
Note - The current firmware version returns a '???(0)' value for the Policy
Tagged parameter.
Inventory Info
Displays inventory information for the remote devices connected to the
ports.