Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 57)

AlliedView™-EMS 4.0.3 Device Management Guide Page 57 of 468
TACACS+
Basic Info
Displays basic TACACS+ information.
TACACS+ Server Info
Displays information about TACACS+ server.
Note - Configuring the Row Status parameter to invalid values will not return
an error message except for the 'create and go' value.
Secure Shell
SSH Server
Displays information about the status of public key authentication and the
type of regenerated host key.
Note - Configuring the Regenerate Host Key parameter to 'rsa', 'dsa' or 'rsa1'
values will result to an error message "time out occurred." but the value is
successfully set. Moreover, after the set operation, attempting to view this
table will display the following 'read-only' parameters and should be ignored:
•
Server Host Public Key Algorithm
•
Server Host Public Key Fragment ID
•
Server Host Public Key Fragment Text
•
Server Host Public Key Fingerprint Algorithm
•
Server Host Public Key Fingerprint Digest Format
•
Server Host Public Key Fingerprint
Note - The current firmware version does not allow the Regenerate Host
Key parameter to be set to 'rsa1' as its value.
SSH Client
Displays information about the user name ssh client will use and the value of
the regenerated self key.
Note - Valid MIB Set values for the User Name parameter should range from
1-48. However, the current firmware version allows the user to enter values
in the range 0-160.
Note - The current firmware version does not allow the Regenerate Self Key
parameter to be set to 'rsa1' as its value.
Note - Configuring the Regenerate Self Key parameter to 'rsa' or 'dsa' as its
value will cause the device to be inaccessible and may need the restarted.
Public Key Fragment Text
Displays the router's public key.