Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 300)

AlliedView™-EMS 4.0.3 Device Management Guide Page 300 of 468
Aggregator Port List
Displays Link Aggregation Control information for every Aggregation Port
associated with this device.
Note - The current firmware version returns 'noSuchName' for the Port
Number parameter.
Note - The current firmware version does not allow the following parameters
to be configured:
•
Actor System Priority
•
Actor Operational Key
•
Partner Administrative System Priority
•
Partner Administrative System ID
•
Actor Port Priority
•
Partner Administrative Port
•
Partner Administrative Port Priority
Note - Setting the Actor Administrative Status parameter and the Partner
Administrative Status parameter to 'lacpActivity' or 'lacpTimeout' will result
in the same hex value of '6C'. On the other hand, setting them to
'distributing' or 'defaulted' will result in the same hex value of '64'.
LACP Statistics
Displays Link Aggregation information for every port that is associated with
this device.
Note - The current firmware version returns 'noSuchName' for all
parameters under this sub-menu option.
LACP Debug
Displays Link Aggregation debug information for every port that is associated
with this device.
Note - The current firmware version returns 'noSuchName' for all
parameters under this sub-menu option.
Expansion Module Notes
•
The current firmware version does not allow Device Manager to detect the
presence or absence of an XFP transceiver in any of the expansion module's XFP
slots. As a result, the XFP slots on the device image will always show XFP images
regardless of whether or not XFP transceivers are physically present in the slots.
AT-9700 Series