Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 385)

AlliedView™-EMS 4.0.3 Device Management Guide Page 385 of 468
CLI Servers
Displays information about CLI Servers.
Users
User Info
Displays the information about the users currently logged in the device.
User Config
Displays the information about the users configured in the local user
database of the device.
Security Password Rules
Displays the information security password settings.
NTP
Peers
Displays the NTP Peer Information on the device.
Note - The current firmware version does not allow the Row Status
parameter to be set to 'active' as its value. Attempting to do so will result in
the error message "The error occurred with 'Set' operation. Error: time out
occurred".
Note - Valid MIB Set values for the Name Address parameter is from 1 to
256 characters. However, the current firmware version allows the user to
enter values greater than the valid range.
Associations
Displays the NTP Association on the device.
NTP Info
Displays the peer index's next available value.
System Log
Log Entries
Displays information of the log entries on the device.
Note - The current firmware version returns a 'noSuchName' value
intermittently for the Log Entries parameter when using SNMPv1.
Log Options
Displays the log options on the device.