Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 42)

AlliedView™-EMS 4.0.3 Device Management Guide Page 42 of 468
Event Log
Displays information about events sent to the system log file.
Error Log
Displays information about errors registered to the system cache.
Syslog Device
Displays information about Syslog diagnostic messages.
Note - The current firmware version does not allow the Syslog Device
Control parameter to be configured.
Syslog Collector
Displays the information to generate Syslog messages to an aggregating agent
or collector.
Syslog Application
Displays information about a managed entity that provides individual control
over the severity level of the messages that it will generate.
Note - The current firmware version does not allow the Severity parameter
to be configured.
Reset
Resets the switch.
Telnet
Starts a Telnet connection to the switch.
WEB Browser
Connects to the switch's HTTP server.
Routing Menu
From the Routing menu, you can view and edit information about the switch's routing
functions.
IP
ARP Table
Displays the ARP cache on the switch.
Note - The current firmware version does not allow the Physical Address
parameter to be configured. Attempting to configure this parameter to any
valid value will result in the error "The error occurred with 'Set' operation.
Error. bad value.".