Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual
Page 270

AlliedView™-EMS 4.0.3 Device Management Guide
Page 270 of 468
MAC Address Security
Displays MAC Address Security parameters and allows you to set the security level
for dynamic and static MAC addresses learned and assigned to a port.
DoS Defense
Displays DoS Defense parameters and allows you to enable/disable a defense
mechanism on a port.
Note
- The Attack Mirror Port parameter under each Attack Type option is already
obsolete and should be ignored.
Note
- The Attack Mirror Port Status parameter is not applicable to the SYN Flood
and Smurf defenses and should be ignored.
LAN IP Subnet
Displays LAN IP address and subnet mask
SYN Flood Config
Displays syn flood attack type configuration
Smurf Config
Displays smurf attack type configuration.
Land Config
Displays land attack type configuration
IP Option Config
Displays IP option attack type configuration
Note
- L3 Models: The current firmware version does not allow the Attack
Action Status parameter to be set to 'enabled'.
Note
- L3 Models: The current firmware version does not allow the Attack
Mirror Port Status parameter to be set to 'enabled' or 'disabled'.
Teardrop Config
Displays teardrop attack type configuration
Ping Death Config
Displays ping of death attack type configuration