Security menu – Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual
Page 291

AlliedView™-EMS 4.0.3 Device Management Guide
Page 291 of 468
Security Menu
From the Security menu, you can view and edit different security and authentication
protocols SSL, SSH, AAC, ACL, port-based and MAC-based authentication.
Authentication Info
Displays authentication information such as the Port Access Control status,
authentication protocol used to authenticate user and authentication mode of the
device.
Port-based Authentication
PAE Port Info
Displays the system level information for each port supported by the Port
Access Entity.
Note
- The current firmware version returns 'noSuchName' for the Port
Number parameter.
Note
- The current firmware version does not allow the Initialize and Re-
authenticate parameters to be configured.
Authenticator PAE Info
Displays configuration objects for the Authenticator PAE associated with
each port.
Note
- The current firmware version returns 'noSuchName' for the Port
Number parameter.
Note
- The current firmware version does not allow the Key Transmission
Status parameter to be configured.
Authenticator PAE Statistics
Displays statistics objects for the Authenticator PAE associated with each port.
Note
- The current firmware version returns 'noSuchName' for the Port
Number parameter.
Authenticator PAE Diagnostics
Displays diagnostics objects for the Authenticator PAE associated with each
port.
Note
- The current firmware version returns 'noSuchName' for the Port
Number parameter.
Authenticator PAE Session Statistics
Displays session statistics objects for the Authenticator PAE associated with
each port.