Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 320)

AlliedView™-EMS 4.0.3 Device Management Guide Page 320 of 468
Note - Configuring the Copy Begin, Move Begin, and Delete Begin parameters
to '1' with invalid values set for the Source File Name and Destination File
Name will not return an error message.
SD Card
Displays information about the installed SD cards.
Note - The current firmware version returns a '???(0)' value for the Presence
parameter if the stack id is 8.
Config File Info
Device Configurations
Current Config
Allows the user to save and set the running configuration of the
device to its flash.
Next Boot Config
Displays the full path of the configuration file to use the next time the
device is rebooted.
Default Config
Displays the default config file info of the device.
GUI Configurations
Displays the latest GUI applet file residing in the root directory of
flash that is applicable to the currently running system software.
CLI Servers
Displays information about CLI Servers.
Users
User Info
Displays the information about the users currently logged in the device.
User Config
Displays the information about the users configured in the local user
database of the device.
Security Password Rules
Displays the information security password settings.
NTP
Peers
Displays the NTP Peer Information on the device.
Note - The current firmware version does not allow the Row Status
parameter to be set to 'active' as its value. Attempting to do so will result in