Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 419)

AlliedView™-EMS 4.0.3 Device Management Guide Page 419 of 468
Protocol IDs
Displays the protocol information about the remote system.
LLDP MED
Device Info
Displays information which describe the device's behavior of the LLDP-MED.
MED Port Config
Displays the LLDP configuration information that controls the transmission
of the MED.
Note - Device Manager does not handle objects of type BITS correctly. As a
result, the MED TLVs Tx Enable parameter will not be configurable and will
display an 8-bit binary string instead of the actual TLV types allowed.
However, the TLV types allowed can still be determined by looking at the
bits that are on from left to right:
•
Bit 0 - Capabilities
•
Bit 1 - Network Policy
•
Bit 2 - Location
•
Bit 3 - Extended PSE
•
Bit 4 - Extended PD
•
Bit 5 - Inventory
Local System
Network Policy Info
Displays information about a particular policy on a specific port
component.
Note - The current firmware version returns a '???(0)(???(0))' value for
the Unknown Policy parameter.
Note - The current firmware version does not return any value for
the Application Type parameter.
Location Info
Displays the Location information as advertised by the local system.
MED General Info
Displays LLDP-MED information about a local component.
Note - The POE/PSE Power Source parameter is not applicable to the
SwitchBlade x908 and should be ignored.
Remote Systems
Remote Capabilities
Displays LLDP-MED capabilities of remote devices connected to the
device ports and communicating via LLDP-MED.