Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 294)

AlliedView™-EMS 4.0.3 Device Management Guide Page 294 of 468
Note - The current firmware version does not allow the Cipher Suites
parameter to be configured.
Certificate File
Displays the parameters used in downloading certificate or key files.
Access Authentication Control
Basic Info
Displays the maximum number of Login method lists, Enable method lists,
Server Groups and AAC servers supported by the system.
Login Method Lists
Displays information about Login authentication method lists.
Note - For user-defined lists, the only valid MIB Set value for the Row Status
parameter is ‘destroy’. Attempting to set this parameter to any other value
will result in the error message: ”The error occurred with 'Set' operation.
Error: bad value.”
Enable Method Lists
Displays information about Enable authentication method lists.
Note - For user-defined lists, the only valid MIB Set value for the Row Status
parameter is ‘destroy’. Attempting to set this parameter to any other value
will result in the error message: ”The error occurred with 'Set' operation.
Error: bad value.”
Application Authentication Settings
Displays various applications that can be used to execute authentication such
as console, telnet, HTTP and SSH.
Server Group Info
Displays information about server groups.
Note - For user-defined server groups, the only valid MIB Set value for the
Row Status parameter is ‘destroy’. Attempting to set this parameter to any
other value will result in the error message: ”The error occurred with 'Set'
operation. Error: bad value.”
Server Info
Displays information about servers.
Note - The current firmware version does not allow the Authentication Key
parameter to be configured.
Note - The only valid MIB Set value for the Row Status parameter is ‘destroy’.
Attempting to set this parameter to any other value will result in the error
message: ”The error occurred with 'Set' operation. Error: bad value.”