Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 85)

AlliedView™-EMS 4.0.3 Device Management Guide Page 85 of 468
Security Menu
From the Security menu, you can view and edit different security and authentication
protocols SSL, SSH, and port-based authentication.
Authentication/Authorization/Accounting
Basic Info
Displays basic information about Authentication/Authorization/Accounting.
Note - The current firmware version does not allow the EAP Current
Method List parameter to be configured.
Note - The current firmware version will always display an encrypted value
for the System Password Level 1 to 15 parameters regardless of whether the
type of password set is 'clear text' or 'encrypted password'.
Note - The current firmware version accepts up to 160 characters for the
System Password Level 1 to 15 parameters, including the '#' or '$' character
as directive that indicates the type of password being used.
Method Lists
Displays information about all method lists.
Note - The current firmware version does not allow Row Status parameter
to be set to 'create and go' or 'destroy' as its value.
Lines
Displays information about all lines, their passwords and their authorization
levels.
Note - The current firmware version does not allow the Row Status and
Password Valid Time parameters to be configured.
Note - The current firmware version is unable to display any value for the
Password Expiry Date parameter.
Note - The current firmware version will always display an encrypted value
for the Password parameter regardless of whether the type of password set
is 'clear text' or 'encrypted password'.
Note - The current firmware version allows the user to enter values up to
160 characters for the Password parameter.