Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual
Page 351

AlliedView™-EMS 4.0.3 Device Management Guide
Page 351 of 468
•
Bit 0 - Port Description
•
Bit 1 - System Name
•
Bit 2 - System Description
•
Bit 3 - System Capabilities
Note
- When multiple units of the AT-x900-12X series are stacked
together, the 'Base Ports' submenu is displayed even if the AT-XEM-
STK is the only installed XEM module in the device.
Additional Info
Displays the control selection of LLDP Port VLAN-ID TLVs (Type-
Length-Value) to be transmitted on individual ports.
Note
- When multiple units of the AT-x900-12X series are stacked
together, the 'Base Ports' submenu is displayed even if the AT-XEM-
STK is the only installed XEM module in the device.
Management Addresses
Displays control selection of LLDP management address TLV instances to be
transmitted.
Note
- Device Manager does not handle objects of type OCTET STRING correctly.
As a result, the Ports Tx Enable parameter will display a sequence of bytes in
hexadecimal format instead of the actual input value.
Optional TLVs
VLAN Names
Displays the set of ports on which the Local System VLAN name instance
will be transmitted.
Protocol VLANs
Displays the set of ports on which the Local System Protocol VLAN instance
will be transmitted.
Protocol IDs
Displays the set of ports on which the Local System Protocol instance will be
transmitted.
LLDP Statistics
Remote Tables
Displays LLDP extension objects associated with remote systems.
Port Tx
Displays the LLDP transmission statistics for individual ports.