Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 114)

AlliedView™-EMS 4.0.3 Device Management Guide Page 114 of 468
Error
Displays error statistics in the network segment such as CRC errors,
alignment errors, bad frames received late collisions and total transmit
errors.
Note - There may be times when Device Manager will not be able to
successfully retrieve error statistical information. When this happens,
all parameters in this table will display the value "retry over occurred".
To prevent this from happening, do the following:
•
Go to File Property.
•
Click on the Settings button in the Polling Options area.
•
Increase the value of the Timeout parameter in the Retry area.
History Control Table
Displays the RMON History table.
Note - The current firmware version does not support RFC1757. As a result, Device
Manager will display the error message "Failed to get MIB data."
Alarm Table
Displays the RMON Alarm table.
Event Table
Displays the RMON Event table.
Event Log
Displays the RMON Event log.
Port Menu
From the Port menu, you can view and edit MIB information about the port.
Utilization
Displays the port's utilization information.
Interface Info
Standard
Displays port statistics such as the number of packets received and
transmitted on the port, bytes received and transmitted on the port and port
status.
Note - The current firmware version does not support the Specific Media
MIB parameter.