Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 331)

AlliedView™-EMS 4.0.3 Device Management Guide Page 331 of 468
Note - The current firmware version returns a '???(0)' value for the Policy
Tagged parameter.
Inventory Info
Displays inventory information for the remote devices connected to the
ports.
Location Info
Displays the Location information as advertised by the remote system.
POE Info
Displays information about PoE type of the remote devices connected to the
ports.
POE/PSE Info
Displays information about Extended PoE PSE information for the remote
devices connected to the ports.
POE/PD Info
Displays information about XPoEPD information as advertised by the remote
system.
802.3 Config
Port Config
Displays the LLDP configuration information that controls the transmission
of IEEE 802.3.
Note - Device Manager does not handle objects of type BITS correctly. As a
result, the 802.3 TLVs Tx Enable parameter will not be configurable and will
display an 8-bit binary string instead of the actual TLV types allowed.
However, the TLV types allowed can still be determined by looking at the
bits that are on from left to right:
•
Bit 0 - MAC Physical Config Status
•
Bit 1 - Power Via MDI
•
Bit 2 - Link Aggregation
•
Bit 3 - Max Frame Size
Local System
Ethernet Port Info
Displays information about a particular port component.
Power Ethernet Port Info
Displays power ethernet information on particular port component.
Link Aggregation Info
Displays link aggregation information about a particular port component.