Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 414)

AlliedView™-EMS 4.0.3 Device Management Guide Page 414 of 468
IP Statistics
Displays statistics about IP, such as the number of IP datagrams received.
Note - Valid MIB Set values for the Default TTL parameter should range from
1-255. However, the current firmware version does not allow this parameter
to be set to '1' as its value. Attempting to set this parameter to '1' will result
in the error message "The error occurred with 'Set' operation: time out
occurred." Connection with the device will be lost and the only way to re-
establish connection will be to perform a manual reset.
UDP
Listener Info
Displays UDP listener information.
UDP Statistics
Displays UDP statistics.
TCP
Connection Info
Displays TCP connection-specific information.
Note - The Connection Status parameter is implemented as 'read-only'.
TCP Statistics
Displays TCP statistics.
ICMP Statistics
Displays ICMP statistics.
DNS
DNS Server
Displays DNS server information.
Note - The current firmware version does not allow the Status parameter to
be set to 'active' as its value. Attempting to do so will result in the error
message "The error occurred with 'Set' operation. Error: time out
occurred".
DNS Client
Displays DNS Client information.