beautypg.com

Igmp menu, Lldp menu – Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual

Page 81

background image


AlliedView™-EMS 4.0.3 Device Management Guide

Page 81 of 468

Port Priority Group

Displays information about the port priority.

Traffic Class

Displays information about the traffic class and traffic class priority.

Note

- Valid MIB Set values for Traffic Class parameter are in the range [0-3]

inclusive. Attempting to set this parameter to a value outside of the valid
range will result in the error message: "The error occurred with 'Set'

operation. Error: bad value."


MAC Table Info

Displays MAC table information.


MAC Base Priority Support

Displays which features of the max base priority are supported.

IGMP Menu

From the IGMP menu, you can view and edit IGMP information such as IGMP queries

and reports sent between devices, VLAN's IGMP functions and interfaces on which IGMP

is enabled.

MAC Multicast Info

Displays configurations of the enabling/disabling multicast.


IGMP Config

Displays configurations of the Internet Group Management Protocol function.

LLDP Menu

From the LLDP menu, you can view and edit LLDP configurations, statistics, local system

data and remote systems data components.

LLDP Configuration

General Config

Displays LLDP general function such as enabling LLDP, Tx delays and others.

Note

- The current firmware version allows the user to enter any character

as valid value for the Clear Received Info parameter.


Port Config

Displays the control selection of LLDP Port VLAN-ID TLVs to be

transmitted on individual ports.