Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 391)

AlliedView™-EMS 4.0.3 Device Management Guide Page 391 of 468
Bridge Port Info
Displays bridge port information.
Note - The current firmware version returns the value 'NULL' for the Circuit
parameter.
802.1p
Device Capabilities
Displays the device capabilities information.
Traffic Class
Displays the bridge traffic class and received traffic class info.
Note - The Traffic Class Priority parameter is not applicable to AT-x900-24X series
(AlliedWare Plus) and should be ignored.
Note - The Received Traffic Class parameter is implemented as 'read-only'.
LLDP Menu
From the LLDP menu, you can view and edit LLDP configurations, statistics, local system
data and remote systems data components.
Note - When multiple units of the AT-x900-24X series are stacked together, port
numbering is continuous based on the Stack ID.
•
Stack ID 1 = 1 - 48
•
Stack ID 2 = 49 - 96
•
Stack ID 3 = 97 - 144
•
Stack ID 4 = 145 - 192
•
Stack ID 5 = 193 - 240
•
Stack ID 6 = 241 - 288
•
Stack ID 7 = 289 - 336
•
Stack ID 8 = 337 - 384
This numbering scheme assumes that a unit can have a maximum of 48 ports.
LLDP Configuration
General Config
Displays LLDP general function such as enabling LLDP, transmission delays
and others.
Port Config
Standard
Displays the LLDP configuration information of a particular port.