Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual
Page 152

AlliedView™-EMS 4.0.3 Device Management Guide
Page 152 of 468
Loader
Load Status
Displays the status of the device loader.
Load Parameters
Displays information about the files to be loaded.
LLDP Configuration
General Config
Displays basic LLDP configuration.
Port Config
Displays LLDP configuration for each port.
Note
- The current firmware version returns a 'noSuchName' value for the
Port Number parameter.
Note
- Device Manager does not handle objects of type BITS correctly. As a
result, the TLVs Tx Enable parameter will not be configurable and will display
an 8-bit binary string instead of the actual TLV types allowed. However, the
TLV types allowed can still be determined by looking at the bits that are on
from left to right:
•
Bit 0 - Port Description
•
Bit 1 - System Name
•
Bit 2 - System Description
•
Bit 3 - System Capabilities
LLDP Statistics
Remote Tables
Displays statistics for the LLDP remote tables.
Port Tx
Displays statistics for LLDP frames transmitted.
Note
- The current firmware version returns a 'noSuchName' value for the
Port Number parameter.
Port Rx
Displays statistics for received LLDP frames.
Note
- The current firmware version returns a 'noSuchName' value for the
Port Number parameter.