Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual
Page 343

AlliedView™-EMS 4.0.3 Device Management Guide
Page 343 of 468
File System
File Options Parameters
Displays information about the file options on the device.
File Information
Displays information about the files saved on the device.
Note
- The current firmware version returns a 'noSuchName' value
intermittently for the File Information parameter when using SNMPv1.
Note
- The current firmware version does not return values for the File Size,
File Creation Time and File Attributes parameters intermittently when using
an SNMPv3 account.
Note
- The current firmware version returns a 'noSuchName' value for the
File Information Table parameters when the Stack ID of the Stacking Master
is not '1'.
File Operations
Allows user to perform copy, move and delete file operations on the device.
Note
- The current firmware version allows the Copy Begin, Move Begin and
Delete Begin parameters to be set to '1' even if the values set in the Source
Stack ID and Destination Stack ID parameters are incorrect. However, copy,
move or delete operation will not be successful.
Note
- Configuring the Copy Begin, Move Begin, and Delete Begin parameters
to '1' with invalid values set for the Source File Name and Destination File
Name will not return an error message.
SD Card
Displays information about the installed SD cards.
Note
- The current firmware version returns a '???(0)' value for the Presence
parameter if the stack id is 8.
Config File Info
Device Configurations
Current Config
Allows the user to save and set the running configuration of the
device to its flash.
Next Boot Config
Displays the full path of the configuration file to use the next time the
device is rebooted.
Default Config
Displays the default config file info of the device.