Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 213)

AlliedView™-EMS 4.0.3 Device Management Guide Page 213 of 468
LLDP Menu
From the LLDP menu, you can view and edit LLDP information such as the LLDP Port
Configuration and Local System Data.
LLDP Configuration
General Config
Displays basic LLDP configuration.
Port Config
Displays LLDP configuration for each port.
Note - Device Manager does not handle objects of type BITS correctly. As a
result, the TLVs Tx Enable parameter will not be configurable and will display
an 8-bit binary string instead of the actual TLV types allowed. However, the
TLV types allowed can still be determined by looking at the bits that are on
from left to right:
•
Bit 0 - Port Description
•
Bit 1 - System Name
•
Bit 2 - System Description
•
Bit 3 - System Capabilities
LLDP Statistics
Remote Tables
Displays statistics for the LLDP remote tables.
Port Tx
Displays statistics for LLDP frames transmitted.
Port Rx
Displays statistics for received LLDP frames.
Local System Data
General Info
Displays information about the local LLDP system.
Port Info
Displays information on the LLDP of local ports.
Management Addresses
Displays management addresses of the local LLDP system.
Note - Device Manager does not handle objects of type OCTET STRING
correctly. As a result, the Port Tx Enable parameter will display a sequence
of bytes in hexadecimal format instead of the actual input value.