Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual
Page 83

AlliedView™-EMS 4.0.3 Device Management Guide
Page 83 of 468
Management Addresses
Displays the management address information on the remote system
learned on a particular port contained in the local chassis.
Note
- The current firmware version returns the value 'NULL' for the
OID parameter.
LLDP MED
Device Info
Displays information which describe the device's behavior of the LLDP-MED.
MED Port Config
Displays the LLDP configuration information that controls the transmission
of the MED.
Note
- Device Manager does not handle objects of type BITS correctly. As a
result, the TLVs Tx Enable parameter will not be configurable and will display
an 8-bit binary string instead of the actual TLV types allowed. However, the
TLV types allowed can still be determined by looking at the bits that are on
from left to right:
•
Bit 0 - Port Description
•
Bit 1 - System Name
•
Bit 2 - System Description
•
Bit 3 - System Capabilities
Note
- Device Manager does not handle objects of type BITS correctly. As a
result, the MED TLVs Tx Enable parameter will not be configurable and will
display an 8-bit binary string instead of the actual TLV types allowed.
However, the TLV types allowed can still be determined by looking at the
bits that are on from left to right:
•
Bit 0 - Capabilities
•
Bit 1 - Network Policy
•
Bit 2 - Location
•
Bit 3 - Extended PSE
•
Bit 4 - Extended PD
•
Bit 5 - Inventory
Network Policy Info
Displays information about a particular policy on a specific port component.
Note
- The current firmware version does not return any value for the
Application Type parameter.