Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 229)

AlliedView™-EMS 4.0.3 Device Management Guide Page 229 of 468
Error Info
Displays information about errors related to the Frame Relay module.
Call List Menu
From the Call List menu, you can view ISDN call information. The Call List submenus are
greyed out if the device is not configured for ISDN.
Note - The Call List Menu does not apply to the Rapier 48i, Rapier G6, Rapier G6F-LX/SC,
Rapier G6F-SX/SC and Rapier G6F-SX/MT.
Detail Info
Displays ISDN call information such as ISDN number and call direction for active
calls.
Active call
Displays information about currently active ISDN calls.
Port Menu
From the Port menu, you can view and edit MIB information about the port.
Utilization
Displays the port's utilization information.
Interface Info
Displays port statistics such as the number of frames received and transmitted on
the port, bytes received and transmitted on the port, and port status.
Error Statistics
Displays error statistics.
Spanning Tree Info
Displays the port's spanning tree parameters.
Enable
Enables the port.
Disable
Disables the port.
Rapier