Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 55)

AlliedView™-EMS 4.0.3 Device Management Guide Page 55 of 468
Port-based Authentication
Basic Info
Displays basic port authentication and VLAN information.
Note - Device Manager always treats objects of type OCTET STRING as a
sequence of bytes in hexadecimal format and does not convert them to plain
text format when necessary. As a result, the Guest VLAN Ports parameter
will neither be readable nor configurable.
Port Authentication Info
Displays the value of the MAC based authentication information and Radius
attributes.
Note - The current firmware version does not allow the Radius Attribute
ACL Name Enabled parameter to be set to 'true' as its value.
Port Session Authentication Info
Displays the session statistics information for an Authenticator PAE.
PAE Port Info
Displays the system level information for each port supported by the Port
Access Entity.
Note - The current firmware version does not allow the Initialize and Re-
authenticate parameters to be set to 'true' as its value.
Authenticator PAE Info
Displays configuration objects for the Authenticator PAE associated with
each port.
Note - The current firmware version does not allow the Administrative
Controlled Directions parameter to be set to 'in' and Key Transmission
Status parameter to 'true' as its value.
Authenticator PAE Statistics
Displays statistics objects for the Authenticator PAE associated with each port.
Authenticator PAE Diagnostics
Displays diagnostics objects for the Authenticator PAE associated with each port.
Authenticator PAE Session Statistics
Displays session statistics objects for the Authenticator PAE associated with
each port.