Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 50)

AlliedView™-EMS 4.0.3 Device Management Guide Page 50 of 468
Port Rx
Displays the LLDP frame reception statistics for a particular port.
LLDP System Data
Local System
General Info
Displays LLDP information associated with local systems.
Port Info
Displays port information associated with the local system.
Management Addresses
Displays the management address information on the local system.
Note - The current firmware version returns the value 'NULL' for the
OID parameter.
Remote Systems
Connection Info
Displays one or more rows per physical network connection.
Management Addresses
Displays the management address information on the remote system
learned on a particular port contained in the local chassis.
Note - The current firmware version returns the value 'NULL' for the
OID parameter.
LLDP MED
Device Info
Displays information which describe the device's behavior of the LLDP-MED.
MED Port Config
Displays the LLDP configuration information that controls the transmission
of the MED.
Note - Device Manager does not handle objects of type BITS correctly. As a result,
the TLVs Tx Enable parameter will not be configurable and will display
an 8-bit binary string instead of the actual TLV types allowed. However,
the TLV types allowed can still be determined by looking at the bits that are
on from left to right:
•
Bit 0 - Port Description
•
Bit 1 - System Name
•
Bit 2 - System Description
•
Bit 3 - System Capabilities