Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 279)

AlliedView™-EMS 4.0.3 Device Management Guide Page 279 of 468
Telnet
Starts a Telnet connection to the switch.
WEB Browser
Connects to the switch's HTTP server.
Routing Menu
From the Routing menu, you can view and edit various routing protocols such as RIP,
DVMRP, OSPF, PIM and IPM.
IP
Interface Info
Displays information about IP interfaces.
Note - The current firmware version does not allow the following parameters to be
configured:
•
Interface Name
•
IP Subnet Mask
•
VLAN Name
•
Operation Mode
•
Secondary IP
Forwarding Database
Displays the Forwarding Database table.
ARP Aging Time
Displays the timeout period in minutes for aging out dynamically learned arp
information.
Static Route Table
Displays the IP static routing table.
Note - The current firmware version does not allow the Next Hop Address
and Destination Metric parameters to be configured.
Note - The only valid MIB Set value for the Entry Status parameter is ‘invalid’.
Attempting to set this parameter to any other value will result in the error
message: ”The error occurred with 'Set' operation. Error: noSuchName.”
IP Statistics
Displays statistics about IP routing, including the number of IP datagrams
received.