Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 392)

AlliedView™-EMS 4.0.3 Device Management Guide Page 392 of 468
Note - Device Manager does not handle objects of type BITS correctly. As a
result, the TLVs Tx Enable parameter will not be configurable and will display an
8-bit binary string instead of the actual TLV types allowed. However, the TLV
types allowed can still be determined by looking at the bits that are on from left
to right:
•
Bit 0 - Port Description
•
Bit 1 - System Name
•
Bit 2 - System Description
•
Bit 3 - System Capabilities
Note - When multiple units of the AT-x900-24X series are stacked together, the
'Base Ports' submenu is displayed even if the AT-XEM-STK is the only installed
XEM module in the device.
Additional Info
Displays the control selection of LLDP Port VLAN-ID TLVs (Type-Length-Value)
to be transmitted on individual ports.
Note - When multiple units of the AT-x900-24X series are stacked together, the
'Base Ports' submenu is displayed even if the AT-XEM-STK is the only installed
XEM module in the device.
Management Addresses
Displays control selection of LLDP management address TLV instances to be
transmitted.
Note - Device Manager does not handle objects of type OCTET STRING correctly.
As a result, the Ports Tx Enable parameter will display a sequence of bytes in
hexadecimal format instead of the actual input value.
Optional TLVs
VLAN Names
Displays the set of ports on which the Local System VLAN name instance
will be transmitted.
Protocol VLANs
Displays the set of ports on which the Local System Protocol VLAN instance
will be transmitted.
Protocol IDs
Displays the set of ports on which the Local System Protocol instance will be
transmitted.
LLDP Statistics
Remote Tables
Displays LLDP extension objects associated with remote systems.