Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual
Page 54

AlliedView™-EMS 4.0.3 Device Management Guide
Page 54 of 468
Note
- The current firmware version does not return any value for the
Password Expiry Date parameter.
Note
- The current firmware version will always display an encrypted value
for the Password parameter regardless of whether the type of password set
is 'clear text' or 'encrypted password'.
Note
- Valid MIB Set values for the Password parameter should range from 1-
159 characters. However, the current firmware version allows the user to
set values up to 160 characters.
Local Users
Displays information about all usernames, their passwords and their
authorizations.
Note
- The current firmware version does not allow the Password Valid Time
parameter to be configured.
Note
- The current firmware version does not return any value for the
Password Expiry Date parameter.
Note
- The current firmware version will always display an encrypted value
for the User Password parameter regardless of whether the type of
password set is 'clear text' or 'encrypted password'.
Note
- The current firmware version accepts up to 160 characters for the
User Password parameter, including the '#' or '$' character as directive that
indicates the type of password being used. However, using the '#' character
will result to an error.
Authenticated Users
Displays all the current users that have been authenticated.
EAP Method Lists
Displays information about all EAP method lists.
Note
- The current firmware version does not allow the Row Status
parameter to be set to 'create and go' or 'destroy' as its value.
Password Verification
Displays table that specifies per every system level, old and new passwords.
Note
- The current firmware version does not allow the Old Password, New
Password and Confirm Password parameters to be configured if the values
for these parameters were initially configured using CLI.