Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual
Page 78

AlliedView™-EMS 4.0.3 Device Management Guide
Page 78 of 468
Note
- The current firmware version does not allow Host Name
parameter to be configured.
Note
- The current firmware version does not allow Command
Action parameter to be set to 'renew force auto config' as its value.
DHCP Client Command
Displays what DHCP action to apply.
DHCP Relay
Basic Info
Displays basic DHCP relay information.
Note
- The current firmware version does not allow MIB Version parameter
to be configured.
DHCP Servers
Displays the next DHCP configuration server.
Enabled Interfaces
Displays enabled DHCP relay interface table.
Note
- The current firmware version does not allow Use Gateway IP Address
parameter to be set to 'false' as its value.
Interfaces Lists
Displays port list and VLAN lists of interfaces that have configured DHCP
relay.
Note
- The current firmware version does not allow any of the parameters
under this table to be configured.
DHCP Snooping
Basic Info
Displays the system's basic DHCP snoop information.
Note
- The current firmware version does not allow the Clear Action parameter to
be set to 'noAction' as its value.
Binding Database
Displays all DHCP snooping entries.
Note
- The current firmware version does not allow the Type parameter to be set
to 'static' as its value.
Enabled VLANs
Displays the IP DHCP snooping enabled VLAN entries.
Trusted Ports
Displays DHCP snooping configured as trusted ports.