beautypg.com

Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual

Page 299

background image


AlliedView™-EMS 4.0.3 Device Management Guide

Page 299 of 468

Scheduling Mechanism

Displays scheduling mechanism parameters.


802.1p Default Priority

Displays the 802.1p default priority table.


802.1p User Priority

Displays the 802.1p user priority class table.


User Priority Regeneration

Displays the regenerated user priorities table.


Traffic Class

Displays the traffic class table.


Outbound Access Priority

Displays the outbound access priority table.


Bandwidth Control

Displays the bandwidth control table.

Note

- Valid MIB Set values for the Receive Rate and Transmit Rate

parameters are in the range [1-10000] inclusive. However, specifying a value

greater than 999 will automatically set these parameters to 999.

Port Trunking

Basic Info

Displays basic information about port trunking.


Trunk Config

Displays port trunking parameteres and allows configuration of the master

port, member ports, trunk type and trunk status.

Note

- The current firmware version does not allow the Member Ports and

Trunk Type parameters to be configured.


Aggregator Info

Displays information about every Aggregator that is associated with this

system.

Note

- The current firmware version returns 'noSuchName' for the

Aggregate Index parameter.

Note

- The current firmware version does not allow the Actor System

Priority and Collector Maximum Delay parameters to be configured.