Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual
Page 45

AlliedView™-EMS 4.0.3 Device Management Guide
Page 45 of 468
Note
- The current firmware version does not allow the following parameters
to be configured:
•
Destination Port Number
•
Routing Protocol MIB
•
Destination Metric 2
•
Destination Metric 3
•
Destination Metric 4
•
Destination Metric 5
Note
- The current firmware version only allows the Routing Type parameter
to be set to 'reject' if the value prior to set operation is 'remote'.
ICMP
ICMP Statistics
Displays ICMP Statistics.
Error Messages
Displays the variable that controls the ability to generate ICMP error messages.
DHCP
DHCP Client
Basic Info
Displays action MIB for DHCP Renew command.
DHCP Client Action
Displays DHCP actions configured in the device.
Note
- The current firmware version does not allow the Host Name
parameter to be configured.
DHCP Client Command
Displays what DHCP action to apply.
DHCP Snooping
Basic Info
Displays the system's basic DHCP snoop information.
Note
- The current firmware version does not allow the Clear Action
parameter to be set to 'noAction' as its value.
Binding Database
Displays all DHCP snooping entries.
Note
- The current firmware version does not allow the Type
parameter to be set to 'learned by protocol' and 'static' as its value.