Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 264)

AlliedView™-EMS 4.0.3 Device Management Guide Page 264 of 468
Reset
Resets the switch.
Telnet
Starts a Telnet connection to the switch.
WEB Browser
Connects to the switch's HTTP server.
Note - L3 Models: Attempting to launch a WEB Browser with network traffic and/or
collision detected within the network will cause the device to restart.
Routing Menu
From the Routing menu, you can view and edit information about the switch's routing
functions.
IP
ARP Table
Displays the ARP cache on the switch.
Address Table
Displays the list of IP interfaces on the switch.
Route Table
Displays the IP routing table on the switch.
Note - The current firmware version does not allow the Device Manager to
display the Destination Network Address parameter on the Edit tab.
Note - L3 Models: The current firmware version returns the value 'NULL' for
the Routing Protocol MIB parameter.
IP Statistics
Displays statistics about IP routing, including the number of IP datagrams
received.
Note - The current firmware version does not allow the Default TTL
parameter to be configured.
UDP
Listener Info
Displays UDP listener information.
UDP Statistics
Displays UDP statistics.