Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 186)

AlliedView™-EMS 4.0.3 Device Management Guide Page 186 of 468
Port Menu
From the Port menu, you can view and edit MIB information about the port.
Utilization
Displays the port's utilization information.
Interface Info
Displays port statistics such as the number of frames received and transmitted on
the port, bytes received and transmitted on the port, and port status.
Error Statistics
Displays error statistics.
Spanning Tree Info
Displays the port's spanning tree parameters.
MAU Info
Displays interface-related MAU information for the port.
MAU Negotiation Info
Displays the MAU's auto-negotiation settings and its status.
Enable
Enables the port.
Disable
Disables the port.
Expansion Module Notes
•
The current firmware version does not allow Device Manager to detect the
presence of a GBIC Module in an AT-A47 expansion module unless there is an
active connection on the GBIC Module. As a result, GBIC Module image will appear
on the AT-A47 expansion module image only if there is an established connection
on the physical GBIC Module.
AT-8600 Series