Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 286)

AlliedView™-EMS 4.0.3 Device Management Guide Page 286 of 468
IPM
Basic Info
Displays basic information about IP Multicast Routing Protocol.
Interface Info
Displays the list of multicast routing information specific to interfaces.
Note - The current firmware version returns 'noSuchName' for the following
parameters:
•
Rate Limit
•
Received Multicast Octets
•
Transmitted Multicast Octets
•
Received Multicast Octets (HC)
•
Transmitted Multicast Octets (HC).
Note - The current firmware version does not allow the Datagram TTL
Threshold parameter to be configured.
Scope Name Info
Displays the list of multicast scope names.
Note - The Scope Name Info sub-menu option does not display the correct
parameters. Instead, it displays the sub-menu option name as a parameter
with a value of 'noSuchName'.
Scope Boundary Info
Displays a list of the device's scoped multicast address boundaries.
Note - The Scope Boundary Info sub-menu option does not display the
correct parameters. Instead, it displays the sub-menu option name as a
parameter with a value of 'noSuchName'.
Route Table
Displays the table containing multicast routing information for IP datagrams
sent by particular sources to the IP multicast groups known to this device.
Note - The Route Table sub-menu option does not display the correct
parameters. Instead, it displays the sub-menu option name as a parameter
with a value of 'noSuchName'.
Next Hop Table
Displays the table containing information on the next hops on outgoing
interfaces for routing IP multicast datagrams.