Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual
Page 88
AlliedView™-EMS 4.0.3 Device Management Guide
Page 88 of 468
RADIUS Server Info
Displays the IP address, UDP port number for authentication and accounting
request, and current status of the RADIUS server.
Note
- The current firmware version does not allow the Usage parameter to
be set to 'wireless authentication'.
Authentication Client Info
Displays the number of RADIUS Access-Response packets received from
unknown addresses and the identifier of the RADIUS authentication client.
Note
- The current firmware version is unable to display any value for the
Client ID parameter.
Authentication Server Info
Displays the list of RADIUS authentication servers with which the client
shares a secret.
Accounting Client Info
Displays the number of RADIUS Access-Response packets received from
unknown addresses and the identifier of the RADIUS accounting client.
Note
- The current firmware version is unable to display any value for the
Client ID parameter.
Accounting Server Info
Displays the list of RADIUS accounting servers with which the client shares a
secret.
TACACS+
Basic Info
Displays basic TACACS+ information.
TACACS+ Server Info
Displays information about TACACS+ server.
Secure Shell
SSH Server
Displays information about the status of public key authentication and the
type of regenerated host key.
Note
- Configuring the Regenerate Host Key parameter will result in the
error message: "The error occurred with 'Set' operation. Error: time out
occurred" but a key will still be successfully generated.
SSH Client
Displays information about the user name ssh client will use and the value of
the regenerated self key.