Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual
Page 84

AlliedView™-EMS 4.0.3 Device Management Guide
Page 84 of 468
Location Info
Displays the Location information as advertised by the local system.
Note
- Device Manager always treats objects of type OCTET STRING as a
sequence of bytes in hexadecimal format and does not convert them to plain
text format when necessary. As a result, the Location parameter will neither
be readable nor configurable.
POE Info
Displays the defined type of Power over Ethernet advertised by the local device.
POE/PSE Port Info
Displays a table that contains one row per port of PSE/PoE information on
the local system known to this agent.
Policy Container Config
Displays the configuration of a particular policy in the media policy container.
Note
- Device Manager always treats objects of type OCTET STRING as a
sequence of bytes in hexadecimal format and does not convert them to plain
text format when necessary. As a result, the Port Number parameter will
neither be readable nor configurable.
802.3 Config
Port Config
Displays the LLDP configuration information that controls the transmission
of IEEE 802.3
Note
- Device Manager does not handle objects of type BITS correctly. As a
result, the 802.3 TLVs Tx Enable parameter will not be configurable and will
display an 8-bit binary string instead of the actual TLV types allowed. However,
the TLV types allowed can still be determined by looking at the bits that are on
from left to right:
•
Bit 0 - Mac Physical Config Status
•
Bit 1 - Power Via MDI
•
Bit 2 - Link Aggregation
•
Bit 3 - Max Frame Size
Ethernet Port Info
Displays information about a particular port component.