Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 288)

AlliedView™-EMS 4.0.3 Device Management Guide Page 288 of 468
Enhanced View
Displays the Forwarding Database table on a per port basis. User can select a port
or group of ports to view its corresponding Forwarding Database entries.
Discard/Aging Time Info
Displays information about the number of address entries that were learned but
discarded because either there was a lack of memory or the entry's aging timer
expired.
Spanning Tree Info
STP Global Settings
Displays spanning tree parameters such as status and version.
MSTP Instance Info
Displays information about the Multiple Spanning Tree Protocol instance.
Note - The current firmware version does not allow the following parameters to be
configured:
•
VLAN Range List 1 - 64
•
VLAN Range List 65 - 128
•
VLAN Range List 129 - 192
•
VLAN Range List 193 - 256
•
VLAN Range List 257 - 320
•
VLAN Range List 321 - 384
•
VLAN Range List 385 - 448
•
VLAN Range List 449 - 512
•
Row Status
Statistics
Displays statistics about frames received/transmitted on the switch port.
High Capacity Ports
Displays statistics about frames received/transmitted on high capacity ports.
Note - The current firmware version returns 'noSuchName' for the Received
Frames, Transmitted Frames and Discarded Frames parameters.
Overflow Counters
Displays statistics for the high capacity interfaces of a transparent bridge.
802.1p
Config
Displays information on 802.1p such as Device Capabilities, GMRP Status and
if Traffic classes are enabled.
Note - The current firmware version returns 'noSuchName' for the GMRP
Status parameter.