Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual
Page 330

AlliedView™-EMS 4.0.3 Device Management Guide
Page 330 of 468
•
Bit 0 - Capabilities
•
Bit 1 - Network Policy
•
Bit 2 - Location
•
Bit 3 - Extended PSE
•
Bit 4 - Extended PD
•
Bit 5 - Inventory
Local System
Network Policy Info
Displays information about a particular policy on a specific port component.
Note
- The current firmware version returns a '???(0)(???(0))' value for the
Unknown Policy parameter.
Note
- The current firmware version does not return any value for the
Application Type parameter.
Location Info
Displays the Location information as advertised by the local system.
MED General Info
Displays LLDP-MED information about a local component.
POE/PSE Port Info
Displays a table that contains one row per port of PSE/PoE information on
the local system known to this agent.
Note
- The POE/PSE Power Source parameter is only applicable to the AT-
x600-24Ts-PoE and AT-x600-24Ts-PoE+ devices.
Remote Systems
Remote Capabilities
Displays LLDP-MED capabilities of remote devices connected to the device
ports and communicating via LLDP-MED.
Note
- The current firmware version returns alphanumeric values for the
TLV Support and Current TLV Supported parameters instead of strings
representing bits.
Network Policy Info
Displays per port policy type information for a particular physical network
connection.
Note
- The current firmware version does not return any value for the
Application Type parameter.