Availability menu – Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual
Page 397

AlliedView™-EMS 4.0.3 Device Management Guide
Page 397 of 468
Frame Size Info
Displays maximum frame size information about a particular port
component.
Note
- When multiple units of the AT-x900-24X series are stacked together,
the 'Base Ports' submenu is displayed even if the AT-XEM-STK is the only
installed XEM module in the device.
Remote Systems
Ethernet Port Info
Displays information about a particular port component of the remote
device.
Note
- When multiple units of the AT-x900-24X series are stacked together,
the 'Base Ports' submenu is displayed even if the AT-XEM-STK is the only
installed XEM module in the device.
Link Aggregation Info
Displays link aggregation information about a particular port component of
the remote device.
Note
- When multiple units of the AT-x900-24X series are stacked together,
the 'Base Ports' submenu is displayed even if the AT-XEM-STK is the only
installed XEM module in the device.
Frame Size Info
Displays maximum frame size information about a particular port component
of the remote device.
Note
- When multiple units of the AT-x900-24X series are stacked together,
the 'Base Ports' submenu is displayed even if the AT-XEM-STK is the only
installed XEM module in the device.
Availability Menu
From the Availability menu, you can view the EPSR MIB.
EPSR
Displays the EPSR information of the device.
Note
- The current firmware version always returns an 'unknown' value for the From
State parameter.