Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 367)

AlliedView™-EMS 4.0.3 Device Management Guide Page 367 of 468
Physical Interfaces
Displays information about the interfaces found in the device.
Firmware Info
Install Configurations
Displays information about the Software release currently loaded in the device.
Note - The current firmware version returns a 'noSuchName' value for the
Release File Exists? and Patch File Exists? parameters.
Configuration File
Displays the Configuration file name.
Note - The current firmware version accepts inputs from 4 to 38 characters
for the Startup Config and Save Running Config parameters.
Release Licenses
Displays a list of software releases installed on the switch.
Note - The current firmware version does not allow any of the parameters
under this table to be configured.
File System
Total Files
Displays the total number of files stored in the device.
File List
Displays a list of the files in the switch's file system.
Note - The current firmware version does not allow the File Status
parameter to be configured.
Loader
Load Status
Displays the status of the device loader.
Note - The current firmware version does not allow the Load Status
parameter to be set to 'actionupload'.
Load Parameters
Displays information about the files to be loaded.
DHCP Ranges
Displays information about the DHCP module.