Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 265)

AlliedView™-EMS 4.0.3 Device Management Guide Page 265 of 468
TCP
Connection Info
Displays TCP connection-specific information.
TCP Statistics
Displays TCP statistics.
ICMP Statistics
Displays ICMP statistics.
Bridge Menu
From the Bridge menu, you can view and edit bridge information such as the forwarding
database and the spanning tree status.
Forwarding Database
Note - Forwarding Database table entries for aggregated ports do not reflect the
correct port number in the Port Number column.
Note - When multiple units of the AT-9400 series are stacked together, the FDB
table will only return the FDB entries of the master switch.
Note - L2+ Models: Changes to the Forwarding Database table caused by dynamic
network topology/configuration changes will not be reflected unless the device is
restarted.
Standard View
Displays the Forwarding Database table as returned by the device.
Enhanced View
Displays the Forwarding Database table on a per port basis. User can select a
port or group of ports to view its corresponding Forwarding Database
entries.
Discard/Aging Time Info
Displays information about the number of address entries that were learned but
discarded because either there was a lack of memory or the entry's aging timer
expired.
Spanning Tree Info
Displays spanning tree parameters such as priority and cost.
Note - The current firmware version does not allow the Spanning Tree Status
parameter to be configured when the Spanning Tree Version is set to 'MSTP'.