Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 72)

AlliedView™-EMS 4.0.3 Device Management Guide Page 72 of 468
Management ACL Tuning
Displays the current number of access rules and the number after reset.
SSH Tuning
Displays the current number of the maximum number of authorized
keys and its value after reset.
Terminal Sessions
Displays the current number of maximum sessions and its value
after reset.
DNS Client Tuning
Displays the maximum values of the cache entries and the negative
cache entries before and after reset.
DHCP Snooping Tuning
Displays the current maximum number of DHCP snooping entries.
Tuning Parameters
Displays the current value, value after reset, default value, minimum
and maximum value of the different tuning parameters.
Host Parameters
Displays the corresponding value of the different host parameters.
Terminal Debug Mode
Displays the terminal debug mode password.
Note - The current firmware version does not allow the Terminal Debug
Mode Password to be configured.
Banner Config
Manage Banners
Displays banner messages with respect to the connection type: telnet
or console.
Clear Banner Message
When set, clears the selected banner type.
Telnet
Basic Info
Displays the basic telnet information.
Note - The current firmware version accepts up to 160 characters for
the Login Banner parameter.
Note - The current firmware version does not allow the Password
parameter to be configured.