Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual
Page 176

AlliedView™-EMS 4.0.3 Device Management Guide
Page 176 of 468
Expansion Module Notes
•
When adding/removing/changing an expansion module, Device Manager does not
automatically refresh the device image in the main window to reflect the
addition/removal/change. To view the updated device image, click on the Refresh
option under the Agent menu.
•
The Port Speed and Mode parameter of the 100Base-FX port on the AT-A45/SC,
AT-A45/SC-SM15 and AT-A45/MT expansion modules can only be set to '100Mbps
full-duplex'.
•
The AT-A46 expansion module port cannot be manually set to 1000Mbps. However,
the current firmware version allows the Port Speed and Mode parameter for this
port to be set to '1Gbps full-duplex' or '1Gbps half-duplex'
•
The current firmware version allows the Port Speed and Mode parameter of the
AT-A47 expansion module port to be set to '10Mbps full-duplex' or '100Mbps
full-duplex' even if the GBIC installed is not capable of 10/100 Mbps connectivity.
•
The Port Speed and Mode parameter of the AT-STACKM expansion module port
should have a fixed value of 'auto sense'. However, the current firmware version
allows it to be changed to '10Mbps full-duplex', '100Mbps full-duplex' or '1Gbps
full-duplex'.
AT-8500 Series