Security menu – Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual
Page 52

AlliedView™-EMS 4.0.3 Device Management Guide
Page 52 of 468
802.3 Config
Port Config
Displays the LLDP configuration information that controls the transmission
of IEEE 802.3.
Note
- The current firmware version does not allow the 802.3 TLVs Tx
Enable parameter to be configured.
Note
- Device Manager does not handle objects of type BITS correctly. As a
result, the TLVs Tx Enable parameter will not be configurable and will display
an 8-bit binary string instead of the actual TLV types allowed. However, the
TLV types allowed can still be determined by looking at the bits that are on
from left to right:
•
Bit 0 - Port Description
•
Bit 1 - System Name
•
Bit 2 - System Description
•
Bit 3 - System Capabilities
Ethernet Port Info
Displays information about a particular port component.
Link Aggregation Info
Displays link aggregation information about a particular port component.
Frame Size Info
Displays maximum frame size information about a particular port
component.
Security Menu
From the Security menu, you can view and edit different security and authentication
protocols SSL, SSH, and port-based authentication.
Authentication/Authorization/Accounting
Basic Info
Displays basic information about Authentication/Authorization/Accounting.
Note
- The current firmware version does not allow the EAP Current
Method List parameter to be configured. Attempting to configure this
parameter to any valid value will result in the error "The error occurred
with 'Set' operation. Error: gen error".
Note
- The current firmware version will always display an encrypted value
for the System Password Level 1 to 15 parameters regardless of whether the
type of password set is 'clear text' or 'encrypted password'.