Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 39)

AlliedView™-EMS 4.0.3 Device Management Guide Page 39 of 468
SSH Tuning
Displays the current number of the maximum number of authorized keys and
its value after reset.
Terminal Sessions
Displays the current number of maximum sessions and its value after reset.
DNS Client Tuning
Displays the maximum values of the cache entries and the negative cache
entries before and after reset.
DHCP Snooping Tuning
Displays the current maximum number of DHCP snooping entries.
Tuning Parameters
Displays the current value, value after reset, default value, minimum and
maximum value of the different tuning parameters.
Host Parameters
Displays the corresponding value of the different host parameters.
Terminal Debug Mode
Displays the terminal debug mode password.
Note - The current firmware does not allow the Terminal Debug Mode Password
parameter to be configured.
Banner Config
Manage Banners
Displays banner messages with respect to the connection type: telnet or console.
Clear Banner Message
When set, clears the selected banner type.
Telnet
Basic Info
Displays the basic telnet information.
Note - The current firmware does not allow the Password parameter to be
configured.
Note - Valid MIB Set values for the Login Banner parameter should range
from 1-158 characters. However, the current firmware version allows the
user to set values up to 160 characters.
Telnet Sessions
Displays the login time, client IP address and telnet session status.